What scenery does for a layout
Track and trains run just as well on a bare board, but scenery is what turns a loop of track into a place. Hills, trees, roads and buildings give the trains a setting, give your eye something to follow, and hide the edges of the baseboard. It is also one of the more forgiving parts of the hobby: most materials are cheap, and mistakes can usually be painted over, covered or carved away.
This guide gives the overall order of work. Each major step links to a deeper guide in this section.
Plan before you build
A little planning saves a lot of rework:
- Decide where trains must run and where scenery can rise or fall. If the track plan itself is still open, see planning your model railroad. Hillsides, tunnels and embankments all need clearance around the track. Keep the space around moving trains clear enough for your longest and tallest equipment, and test with a few cars before you glue anything down.
- Think in scenes. A town, a quarry, a river crossing and a patch of forest each work as a small scene. Planning scenes is easier than trying to decorate the whole layout at once.
- Collect reference photos of the kind of landscape you are modelling. Real colours and shapes are usually less uniform than what we picture from memory.
- Work from back to front where you can, and finish rough scenery before fragile details such as trees and structures go on.
Step 1: Build the landforms
The landform is the shape of the ground under everything else. Common beginner-friendly options include:
- Foam insulation board. Layers of extruded foam (often already part of the benchwork) can be stacked and carved with a knife or saw. It is lightweight and avoids the weight and mess of heavy plaster.
- Cardboard strip lattice. Strips of cardboard are glued in a web, then covered with a skin of plaster cloth or paper and glue.
- Wire mesh over wood or card formers. A traditional approach that suits steeper, more irregular terrain.
Whichever you choose, shape slopes gently at first. Steep faces are easier to add later with rock castings than to carve out of a block that is already glued in place. If the layout includes a tunnel, plan its opening now; see our guide to building HO model train tunnels and portals.
Step 2: Harden the shell
Landform surfaces are usually covered with a thin, rigid skin. Plaster cloth (gauze impregnated with plaster, wetted and smoothed over the form) is a common choice. Sculptamold or similar paper-and-plaster compounds are handy for filling gaps and blending edges.
Keep the skin fairly thin. A thick layer adds weight and cracking risk without improving the result. Plaster products can create dust when sanded or cut, so work in a ventilated space and consider a dust mask, and follow the manufacturer’s instructions.
Step 3: Paint the earth base
Before anything green goes on, paint the whole surface in an earth colour. A flat latex or acrylic paint in a mid brown or tan is a common choice. This stops white plaster or foam from peeking through the ground cover later, and it sets the colour of the soil. Painting while still wet with the next layer helps, because ground cover sticks in the damp paint or glue.
Step 4: Add rocks and cuts
Exposed rock is one of the quickest ways to make scenery look natural. Plaster castings from rubber or latex moulds are widely used, and the same mould can be rotated and re-used to cover a whole rock face. Colour the castings with thin washes of acrylic paint, going from light to dark. For the full process, read casting plaster rock faces for model railroad scenery.
Step 5: Ballast and ground cover
Once the landforms are painted, you can build up the surface in layers:
- Ballast the track. Spread fine ballast over the roadbed, brush it into shape, then soak it with a wetting agent (water with a drop of dish soap) and secure it with diluted white glue. Take care to keep glue off moving parts such as turnout points.
- Add soil and fine texture. Sprinkle fine ground foam, sifted dirt or sand into wet glue or paint.
- Add coarser turf and static grass. A mix of shades looks more natural than a single green. Static grass applicators help fibres stand upright, but plain white glue and shaken-on fibres still work for a first attempt.
- Finish with bushes, weeds and leaf litter to break up flat areas.
Work in small sections so the glue does not dry before you can add the next layer.
Step 6: Trees and bushes
Trees add height and a sense of scale. Options range from ready-made trees to wire armatures, natural twigs and dried plant stems flocked with foliage material. Group trees in irregular clusters rather than rows, and mix sizes. For hands-on methods, see making realistic model railroad trees from scratch.
Step 7: Water
Ponds, streams and rivers need a carefully prepared, sealed bed. Dark paint underneath gives depth, and the surface can be built up in thin coats of acrylic gloss medium or a poured resin product. Resins and some other products have their own handling and ventilation instructions, so follow the label. Our guide to making realistic water for a model railroad covers the options.
Roads, backdrops and structures
Once the terrain is done, the scene is completed by what people have added to it:
- Building realistic roads ties towns and industries to the landscape.
- Backdrops hide the wall behind the layout and extend the sense of distance.
- Buildings can come from kits or plans; see model railroad building plans and structures, and how to weather buildings so they look lived in.
- Dense areas are covered in model railroad city scenery.
- If you want a particular setting, such as the American West, see themed model train layouts.
Common beginner mistakes
- Too little clearance around the track for tall or wide equipment.
- Skipping the earth base, so white flecks show through the ground cover.
- Glue or plaster on the track. Mask rails and turnouts before messy work, and clean any spills promptly.
- One flat green. Mix shades and textures.
- Straight lines. Roads, rivers, tree lines and hills rarely run perfectly straight in nature.
- Doing everything at once. Finish one area, step back, and judge it before moving on.
A simple starter materials list
- Foam board or cardboard strips, plus a knife and glue
- Plaster cloth and Sculptamold or similar
- Earth-tone flat paint and a few brushes
- Ground foam or turf in several shades, plus fine ballast
- White glue, a spray bottle and a drop of dish soap
- Acrylic paints for washes
- Rubber rock moulds and Hydrocal or similar plaster, if you want cast rock
- Reference photos
Start with a small area, such as a hillside beside a siding. Finishing one corner teaches you more about what works than planning the entire layout on paper.