N Scale Layouts

Can you use rubbing alcohol to clean model train track?

Yes, isopropyl rubbing alcohol is widely used to clean model train track. Learn which strength to choose, how to apply it safely and what to avoid.

On this page
  1. Short answer
  2. Which alcohol to use
  3. How to clean the track
  4. Clean the wheels too
  5. What to avoid
  6. Other ways to clean track
  7. How often to clean

Short answer

Yes. Isopropyl alcohol, sold as rubbing alcohol, is commonly used to clean model train track. A model railroad magazine notes that it is a fairly strong solvent that dissolves the sticky gunk that builds up on rails and wheels. A big advantage is that it evaporates completely and leaves no residue behind, which some other cleaning fluids do.

It is not the only option, and it needs a little care. The details below apply to N scale and other scales alike.

Which alcohol to use

Rubbing alcohol is sold in different strengths, usually labeled as a percentage.

  • 70 percent is reported to be sufficient for most model railroad cleaning jobs.
  • 91 percent is stronger. The same source says it is too strong for most uses because it can damage paint and dissolve glue, although it is useful for stripping paint or softening adhesives.

Look at the label and choose plain isopropyl alcohol. Avoid products with added scents, oils or other ingredients, since those can leave a film that you are trying to remove.

How to clean the track

  1. Turn the power off and, if you can, remove your locomotives and cars from the rails.
  2. Dampen a lint-free cloth, paper towel or cotton swab with alcohol. Do not soak it, and do not pour or spray alcohol directly onto the track.
  3. Wipe the top and inner sides of each rail. The rail head is where wheels make contact. You should see dirt come off on the cloth.
  4. Use a clean part of the cloth as it gets dirty, so that you are not putting the grime back.
  5. Let the rails dry. This normally takes only a short time.
  6. Test with a train and repeat any spots where it still stalls.

Some modelers use wet-pad track cleaners, where a pad carries fluid along the rails. The same source says alcohol works well as the cleaning fluid in these systems.

On a layout that already has scenery, work carefully. Keep alcohol off ballast that is glued down if you can, and off painted or weathered surfaces.

Clean the wheels too

Dirty track is only half the issue. Locomotive and car wheels also collect grime, and they put it back on the rails. One method described by a model railroad magazine is to:

  1. Dampen a paper towel with isopropyl alcohol and lay it across the track.
  2. Hold a locomotive so that one set of wheels sits on the towel and the other on the rails.
  3. Turn the power on and let the wheels on the towel spin, which pulls dirt off the wheels.
  4. Turn the locomotive around and clean the other wheels.

For unpowered cars, a microbrush or cotton swab dampened with alcohol can be used by hand to scrub the wheel treads. See our article on N scale locomotive repair and test stands for more on checking a loco that still runs badly after cleaning.

What to avoid

  • Fire and ventilation. Isopropyl alcohol is flammable and its fumes can irritate. Keep it away from heat and flames, and work with some ventilation.
  • Soaking. Excess liquid can run into places it should not, such as under the track or into a locomotive.
  • Plastic and paint. Test on a hidden spot first. Strong solvents can affect some plastics, paint and decals, and the 91 percent grade is the riskier choice.
  • Glued ballast and scenery. Alcohol is also used to wet ballast before gluing, but strong alcohol can soften glue. Be careful around finished scenery.
  • Live power. Clean with the power off.

Other ways to clean track

Alcohol is not the only approach. Other options include:

  • Commercial track cleaning fluids. Some are made specifically for model trains.
  • Abrasive blocks or pads. These can remove stubborn deposits, but use them lightly. Excess abrasion can scratch the rails, and this is more of a concern on fine N scale track.
  • Track cleaning cars. These run on the layout and wipe the rails as they go.

Some modelers also put a very thin coat of a lubricant on the rails, but opinions differ and it can attract dirt. Check what works for you and what your track maker recommends.

How often to clean

There is no fixed schedule. Clean when you see stalling, flickering lights or poor running, and before long operating sessions. Layouts in dusty rooms may need cleaning more often. If problems keep returning to the same spot, look for a mechanical or wiring cause.

If you are still planning, good track choices and a sound layout design help reduce problems, so see our N scale track plans and the guide to minimum radius.

The complete guide to n scale layouts

N Scale Track Plans: Simple, Atlas and Small Layouts
Read the guide

Keep exploring

Guides from other topics

All topics →