Wiring and Control

Wiring and DCC

Track wiring, AC, DC and DCC control, decoders, feeders, reverse loops, turnouts and signals.

AC vs DC Model Trains Explained

AC vs DC model trains explained: how three-rail AC and two-rail DC differ, where DCC fits, whether old Lionel trains are AC, and which system suits you.

4 min read

How to power a DCC track?

How to power a DCC track: connect a command station and power supply to the rails through a bus and feeders, size the power, and set up a programming track.

3 min read

How to tell if a model train is DCC or DC?

Not sure if your locomotive is DCC or DC? Check the box and markings, look for a decoder or socket inside, and test it safely on a short piece of DC track.

3 min read

Model Railroad Signals for HO and G Scale

A guide to model railroad signals for HO and G scale: block, dwarf and crossing signals, how LED signals are powered and controlled, and outdoor G scale options.

4 min read

Turnouts and Point Motors for Model Railways

A practical guide to turnouts and point motors for model railways: twin-coil, stall and servo types, the switches that control them, frog wiring and common mistakes.

4 min read

Why put a penny on a railroad track?

People put pennies on tracks to get flattened souvenir coins, but it is dangerous and illegal on real railroads. Learn why, and the safe model-railroad coin test.

3 min read