Scenery and Structures

Model Railroad City Scenery

How to plan and build model railroad city scenery: space, buildings, low-relief structures, streets, details, lighting and where the tracks meet the city.

On this page
  1. What makes a city scene work
  2. Plan the space
  3. Buildings
  4. Streets, sidewalks and parking
  5. People, vehicles and street details
  6. Lighting and signs
  7. Weathering and age
  8. Where the railroad meets the city

What makes a city scene work

City scenery is mostly about density and detail. Real downtowns feel crowded: buildings press against each other, streets carry traffic, and signs, poles and people fill every gap. Model cities succeed when they capture that sense of crowding, even if they only use a few feet of layout.

The challenge is that cities take up a lot of space. A modeller in HO scale can rarely fit a full-size city block on a layout, so the usual approach is to suggest the city rather than reproduce it.

Plan the space

Before buying buildings, decide how much of the layout is urban and where.

  • Think in blocks, not buildings. A block with one or two streets is easier to design than a loose scatter of structures.
  • Start with the street plan. Mark the road, sidewalks and building footprints on the baseboard with a pencil. Move paper templates around until the arrangement looks right.
  • Leave room for access and operation. Switching lines and industrial spurs that run through city streets still need working clearance.
  • Choose a time period. Buildings, vehicles, signs and street furniture all change with the era. Mixing periods looks wrong unless it is deliberate.

Buildings

Full-depth buildings

Use full-depth buildings in the foreground, where they can be seen from several angles and where they might have lit interiors. Kits in plastic, resin, wood or card are all common. For a guide to the options and where plans come from, see model railroad building plans and structures.

Low-relief and flat buildings

Low-relief buildings are cut-down versions with only the front and a shallow depth. They are the standard answer to the space problem: you get the look of a tall, packed street without the depth. Place them toward the back of the scene, in front of the backdrop. Printed or photo-based “flats” can sit even further back.

Backdrops

A city backdrop with skyline silhouettes extends the scene without using any baseboard. See backdrops for HO layouts for how to mount and blend them.

Building variety

Vary heights, widths, colours and materials. A block of identical buildings looks like a toy town. Mixing brick, concrete, stucco and wood, and adding gaps or lots between buildings, creates a more natural urban pattern. Keep the tallest buildings toward the back to hide the backdrop’s lower edge.

Streets, sidewalks and parking

Roads in a city are usually flat and sit between curbs, so they are easier to model than country roads. Building realistic roads covers surfaces, markings and weathering in more detail. For city scenes, add:

  • Curbs and sidewalks (styrene strips or card give a clean edge).
  • Crosswalks and lane markings, since city streets are usually well marked.
  • Manholes, drains and utility covers.
  • Alleys and loading areas behind buildings, which are a good place to add clutter.

If a track crosses a street, the road should be built level with the rails, with enough clearance for flanges.

People, vehicles and street details

Details are what bring the scene to life:

  • Vehicles. Use a mix of cars, trucks and buses appropriate to the period. Parked cars are easier and more forgiving than moving ones. Do not overcrowd them or line them up in a perfect row.
  • People. Place figures in small groups, as people tend to cluster. Add some on sidewalks, at bus stops, and in doorways.
  • Street furniture. Lamp posts, fire hydrants, mailboxes, signs, benches, trash cans and traffic lights all help.
  • Rooftop details. Water tanks, vents, chimneys and signs can be seen from above and from eye level.

Keep figures and vehicles in HO scale (1:87) to match your buildings, and check them against doorways and car heights.

Lighting and signs

Lit windows, street lamps and illuminated signs can add atmosphere, particularly in a dimly lit room. LEDs are small and cool, and they are the usual choice. Take care with wiring: plan power routes in advance, and use appropriate resistors or ready-made LED lighting products, following the manufacturer’s instructions. Bright interior lights can show through thin plastic walls, so paint or line the inside of walls with something opaque.

Weathering and age

City buildings are rarely pristine. A little soot on rooftops, streaking under windowsills, faded signs and grime near the ground make the scene more believable. The techniques in how to weather model railroad buildings and structures apply well to brick and concrete as well as wood.

Where the railroad meets the city

The railroad can enter a city on a viaduct or embankment, run down the middle of a street, or serve industries on spurs at the edge of town. Think about how your trains actually move through the scene. Sidings, loading docks and freight houses give the railroad a reason to be there. Track in a street should be embedded to the railhead.

If you are working on the surrounding terrain too, our guide to DIY model railroad scenery covers landforms and ground cover for the areas between town and country.

The complete guide to scenery and structures

DIY Model Railroad Scenery: A Beginner's Guide
Read the guide

Keep exploring

Guides from other topics

All topics →