Scenery and Structures

Making Realistic Model Railroad Trees From Scratch

Make your own model railroad trees from wire, natural twigs and household materials: deciduous and evergreen methods, foliage, planting and building forests.

On this page
  1. Choose a method
  2. Wire armature deciduous trees
  3. Natural armatures
  4. Evergreen trees
  5. Adding foliage
  6. Planting and placing
  7. Making forests quickly
  8. Common mistakes

Choose a method

Trees do more than fill space. They add height, frame buildings and bridges, and hide transitions between scenes and the backdrop. Ready-made trees are available, but making your own can be cheaper, gives you control over size and species, and produces more natural variation.

Three methods cover most needs:

Method Good for Effort
Twisted-wire armature Detailed foreground deciduous trees Moderate to high
Natural armature (twigs, dried weeds, sagebrush) Large numbers of trees quickly Low to moderate
Core and fibre evergreens Pines, firs and spruces Moderate

You can combine all three on a single layout, using wire trees where people look closest and faster methods for the mid-ground and forest.

Wire armature deciduous trees

A wire armature gives you control over trunk thickness, root flare and branch layout.

You will need: floral wire (or fine craft wire), brown paint, a gluing or texture medium, wire cutters, pliers or a hand drill to twist, adhesive spray or hairspray, and foliage such as fine ground foam or turf.

  1. Cut the wire. Cut a number of strands, a few inches longer than the tree height you want. More strands give a thicker trunk. Many guides use somewhere between about 7 and 15 strands for a medium tree.
  2. Bundle and twist. Bundle the strands and twist the middle section together to make the lower trunk.
  3. Split into branches. Separate the bundle into smaller groups and twist each group a few turns, then split again into still smaller groups to make smaller limbs. Repeat until you reach fine twigs. Finishing each tip with a small twisted loop, then snipping it open, gives fine branch tips.
  4. Make roots. Splay out the bottom strands to form a root flare, which also helps the tree stand.
  5. Texture and paint the trunk. Coat the trunk with brown or grey-brown matte paint. For more bark texture, apply a thin layer of plaster or paste to the trunk and carve grooves in it before it sets, or sprinkle fine sand into wet paint.
  6. Adjust. Bend branches until the overall shape looks right. Real trees are not symmetrical.

Use floral wire only for small trees; larger trees may need heavier wire to hold their shape.

Natural armatures

Some real plants naturally resemble tree skeletons. Dried weeds and branching stems, sagebrush, and commercial natural-armature products such as SuperTrees are widely used for this. Modellers in the western United States often use sagebrush, though any fine, branching dried plant material can work.

  1. Collect and trim. Choose pieces that look like a tree silhouette. Trim awkward stems. Make sure the material is dry and free of insects.
  2. Paint. Spray with a dark brown or grey flat paint. Spray paint should be used outdoors or in a well-ventilated area.
  3. Seal. Brush or dip the armature in diluted matte medium or scenic cement.
  4. Add foliage. Sprinkle or roll in fine foliage, such as ground foam or similar material, then shake off the excess and let it dry, for example by standing the tree in a block of foam.

This method is quick, and the result is often more irregular and natural than a wire tree.

Evergreen trees

Conifers have a straight central trunk and a more conical outline.

  1. Make the core. Use a bamboo skewer or thin wooden dowel, tapered at the top.
  2. Add the branches. Common materials include coconut fibre, furnace filter material or twine, trimmed and fluffed into layers around the core. Fibre layers are usually larger at the base and smaller toward the top.
  3. Shape. Trim with scissors into a narrow cone, and don’t make it perfectly regular.
  4. Colour. Spray dark green, olive or very dark brown, in thin coats.
  5. Add texture. Dust the branches with an adhesive and layer fine dark-green turf or static grass fibres, working from the bottom up.

Winter or alpine scenes can be given a dusting of white flocking or similar material, applied lightly.

Adding foliage

Foliage is what makes a tree. A few general principles:

  • Use more than one shade. Mixing two or three greens, with a few lighter or yellower highlights at the top, looks more natural than one colour.
  • Match the season. Deciduous trees can be summer green, autumn orange, red and yellow, or bare for winter. Flowering trees can give spring accents, though they work best sparingly.
  • Keep foliage in clumps. Real leaves grow in masses with gaps between. Spread material in groups, and leave the inner branches visible.
  • Use adhesive carefully. Spray adhesive and hairspray both work, but they should be used in a ventilated space, and away from other scenery you do not want to spray.

Planting and placing

  • Drill and plant. Drill a small hole in the scenery base and glue the trunk in, or glue a pin or short wire stub at the base as a peg.
  • Vary size and species. Use a range of heights, from saplings to mature trees. Mix deciduous and evergreen where appropriate.
  • Group in clusters. Trees rarely grow in neat rows. Use irregular clusters with some gaps and a few loners.
  • Layer from back to front. Taller trees at the rear, shorter trees and bushes in front. This builds depth, which also helps blend into a backdrop.
  • Consider scale. In HO scale, a 60-foot tree is about 8 inches tall. Check that the size of your trees looks right against nearby buildings.
  • Watch the clearance. Keep branches clear of the track and moving trains.
  • Frame features. Trees beside a tunnel portal, a station or a bridge draw the eye and hide awkward joins.

Making forests quickly

Large forests need many trees. To make this practical:

  • Produce in batches. Make a dozen at a time, working in stages (twisting, painting, flocking).
  • Use cheaper trees in the middle distance, such as natural armatures or purchased trees, and save hand-made wire trees for the front.
  • Plant them densely, since the gaps between trunks are usually hidden. Fill spaces under trees with bushes, undergrowth and fallen leaves.
  • Add a few dead trunks or stumps to break up uniform tree lines.

Common mistakes

  • Perfectly symmetrical trees. Real trees have uneven shapes.
  • Uniform green. Use varied tones.
  • Trunks too thin or too straight. Trunks taper and often lean slightly.
  • Rows of identical trees.
  • Overly bright foliage. Slightly muted colours usually look more realistic.
  • Blocking the track or leaving trains to catch branches.

For how trees fit into the broader process of ground cover and landforms, see our DIY model railroad scenery guide. If a stream or pond is part of the scene, the water guide explains how to blend the bank with trees and plants.

The complete guide to scenery and structures

DIY Model Railroad Scenery: A Beginner's Guide
Read the guide

Keep exploring

Guides from other topics

All topics →