Wiring and DCC

Why put a penny on a railroad track?

People put pennies on tracks to get flattened souvenir coins, but it is dangerous and illegal on real railroads. Learn why, and the safe model-railroad coin test.

On this page
  1. Quick answer
  2. Why people do it
  3. Will a penny derail a train?
  4. Why you should not do it on a real railroad
  5. Safer ways to get a flattened coin
  6. The model railroad version: the coin test
  7. How to do the coin test safely

Quick answer

People put a penny on a railroad track to get it flattened. When a train’s wheels roll over the coin, it is squashed into a thin, stretched oval, and some people keep it as a souvenir. It is dangerous and, on a real railroad, usually counts as trespassing. If you want a flattened coin, there are safe ways to get one, and if you want to use a coin on a model railroad, there is a harmless use for it, covered below.

Why people do it

Flattened coins are a long-standing curiosity. A coin that has been run over is thin, wide and often distorted, and people like to collect them or show them off. Because the heavy wheels and the speed of a train flatten the metal so completely, the result looks very different from anything you could make by hand.

Will a penny derail a train?

It is a common belief that a coin could derail a train, and it comes up often in discussion. In practice, the general view is that a single small coin lying on the rail is not expected to derail a train, as the wheels are large and heavy, and the coin is much smaller than the flange and the head of the rail. But no one should rely on that, and it is not a reason to try it. Even if the coin itself is not the danger, the activity is.

Why you should not do it on a real railroad

  • Trespassing: railroad tracks are private property in most places. Walking on or next to the track without permission can be illegal, and you may be fined.
  • Danger to you: trains can be quiet, travel faster than they appear and take a long distance to stop. A person near the tracks can be hit.
  • Danger from the coin: a flattened object can be thrown out when a wheel rolls over it, which is a risk to anyone nearby.
  • Danger to others: tampering with objects on the track can be treated as a serious offense in some places, whatever the intent.

Rules differ by location, so check local law if you have a specific question, but the simple advice is to stay off railroad property.

Safer ways to get a flattened coin

Many museums, railroad attractions and tourist sites have pressed-coin machines. You insert a coin and a fee, turn a crank or press a button, and receive a stamped souvenir, often with a train design. That gets you the souvenir without the risk.

The model railroad version: the coin test

On a model railroad, a coin is sometimes used for a very different purpose: to check that short-circuit protection works. Because the two rails carry opposite polarity, laying a metal object across them creates a short. A DCC command station or booster should detect it and shut down, flash a warning or trip its protection. If nothing happens, your protection may not be working properly, which is worth knowing before a real short damages equipment.

How to do the coin test safely

  1. Read your command station’s manual so you know what a short should look like, such as a flashing light or a shutdown.
  2. Make sure no locomotives or rolling stock are in the area.
  3. Place a coin across the rails in a spot where it is easy to reach.
  4. Watch the system’s reaction. It should react immediately.
  5. Remove the coin and reset the system according to the instructions.
  6. If protection does not trip, stop using the layout until you have found out why.

Do not leave a coin on the rails with the power on for longer than the test requires. Some layouts, especially those using high-current power supplies, can heat up quickly. If you use a conventional transformer with three-rail track, check its circuit breaker instead.

A coin or similar object is also a frequent cause of accidental shorts, such as when a stray washer falls across the track. If a short appears and you cannot find it, our model train track wiring guide explains how to track it down, and the guide to powering a DCC track explains how short protection fits into your setup.

The complete guide to wiring and dcc

Model Train Track Wiring: A Complete Guide
Read the guide

Keep exploring

Guides from other topics

All topics →