What a yard does
A yard is where trains are assembled, broken up, stored and sorted. On a real railroad, yards range from small town sidings to huge classification yards. On a model railroad, a yard can be the heart of the operation or simply a place to store cars and make up trains.
Yards take a lot of space. The key to a good model yard is deciding what you need it to do, and then building no more than that.
Yard types and parts
Common yard functions include:
- Classification yard: cars are sorted by destination and assembled into outbound trains.
- Receiving and departure tracks: where trains arrive and wait to leave. In small layouts these are often combined.
- Interchange: where cars are handed to or from another railroad.
- Passenger terminal: tracks for platforms and the storage of passenger equipment.
- Engine service area: tracks for fueling, servicing and storing locomotives.
Most yards share a few parts: a lead (the track that connects the yard to the main line), a ladder (the set of turnouts feeding the yard tracks), and the yard tracks themselves. A runaround or caboose track may be added where a locomotive needs to change position.
Designing the ladder and throat
The ladder is where most space and design effort goes. A common approach is a series of turnouts feeding parallel tracks. A ladder can be straight or can curve (a “ladder in a curve”) to save length; each has trade-offs for appearance and operation.
Practical points:
- Use turnouts that match your equipment. Many modelers use #6 turnouts in HO yards as a compromise between space and reliable operation, but you should choose according to the longest cars and locomotives you will run.
- Keep the yard throat free of reversing curves that cause couplers to bind.
- Stagger track lengths, so that you have some long tracks and some short.
- Allow clear access from the aisle. Yards are where you spend a lot of time reaching in.
Track lengths and capacity
Decide the longest train you will run, and make at least some yard tracks hold it. Many layouts instead use shorter tracks and run shorter trains, which is fine as long as the design is consistent.
To estimate capacity, measure the length of the cars you plan to use. In HO, a 40-foot freight car works out to roughly 5.5 inches at 1:87, and a 50-foot car to roughly 7 inches, though individual models vary. In N scale (1:160), the same cars are about 3 and 3.75 inches. Leave room for the locomotive and a little space at each end.
HO scale yard plans
HO is the most common scale for yard modelling, and the most commercial track and turnouts are available for it. Compact yards of three to five tracks are common even on modest HO layouts. A simple plan with a lead, a ladder of four turnouts and a runaround can handle a good amount of operation.
If you are short of space, think about making the yard the focus of a shelf layout and moving other features to hidden staging. See switching layout plans and car cards for operating ideas.
N scale yard layouts
N scale allows much more yard in the same space, which is one reason it is popular for freight layouts. Yard tracks can hold more cars, and a ladder takes less room. The trade-off is that small details, track cleaning and coupler operation can be more demanding, so reliable track work is especially important.
To see how large N scale equipment is, read what size an N scale train is.
O scale yards
O scale has more presence and detail, but needs more room. Yards in O scale tend to be shorter, with fewer tracks, or use shorter cars. Two-rail and three-rail track systems both exist, and their track geometry and turnout choices are different, so check the specific products you plan to use before designing.
Operating and servicing
Think about how trains will enter and leave. A yard that is easy to reach from the main line, with room for the locomotive to get around the train, will be more useful than one with many tracks but awkward moves. If you want hidden storage as well, see fiddle yards: design and build hidden staging.
Common questions
Is model railroading in decline? Opinions differ. The hobby has changed, with more people using digital control and modern manufacturing, and there are still many active clubs, manufacturers and publications. There is no single reliable figure for overall participation, so treat strong claims either way with caution.
Why put a penny on a train track? On real railroads, people sometimes flatten coins on the rails, but placing anything on a real track is dangerous and, in most places, trespassing, so it should not be done. On a model railroad, a coin lying across both rails will cause a short circuit, so keep coins and other metal objects off the track.
Are N scale trains worth anything? Some limited-run or older models can be collectible, but value depends on condition, rarity and demand. Check recent sales of the specific model before deciding.
Mistakes to avoid
- Building a yard larger than the layout needs
- Using turnouts too short for the longest cars
- Putting yard tracks where you cannot reach to rerail cars
- Forgetting an escape route for the locomotive
For an overview of layout design, see planning your model railroad.