Layout Planning

Does the Pennsylvania Railroad class S1 still exist?

No, the one Pennsylvania Railroad S1 duplex locomotive was scrapped in the late 1940s. Here is what it was, what survives of the PRR, and S1 models.

On this page
  1. Short answer
  2. What the S1 was
  3. What happened to it
  4. PRR locomotives that do survive
  5. Modeling the S1

Short answer

No. The Pennsylvania Railroad built only one S1 locomotive, and it was scrapped in the late 1940s. It does not survive in a museum or anywhere else.

What the S1 was

The S1 was an experimental steam locomotive built by Baldwin for the Pennsylvania Railroad in 1939. It had a 6-4-4-6 “duplex” wheel arrangement, which means it had two sets of driving wheels, each with its own cylinders. It was designed for fast passenger service and was very large and long. It was displayed at the 1939 New York World’s Fair, where it attracted attention for its streamlined shape.

The S1 was an ambitious design, but in service it had practical problems. Its size limited where it could run, and duplex locomotives of the era were known for issues with wheel slip. The PRR went on to build other duplex designs, and then moved toward diesels.

What happened to it

The S1 was retired and scrapped after relatively few years of service, in the late 1940s. If you read a claim that it survives, check the source carefully, since it may be about a different locomotive or a model.

PRR locomotives that do survive

A number of PRR steam and electric locomotives are preserved. These include examples of the K4s Pacific and GG1 electrics, many of them in the Railroad Museum of Pennsylvania in Strasburg and other museums around the country. Details change as locomotives are moved or restored, so check museum websites for current information.

Modeling the S1

Even though the real locomotive is gone, models of the S1 have been made in various scales over the years, and it remains a favorite with fans of the PRR and of streamlined steam. A long duplex needs generous curves, so check your radius before running one; see minimum curve radius for HO scale. Because the S1 ran in the 1930s and 1940s, it fits a layout set in that era.

For more on choosing a prototype and an era, see modeling a prototype railroad. For the end of the company itself, see why the Pennsylvania Railroad went out of business.

The complete guide to layout planning

Planning Your Model Railroad: Track Plan Design from Scratch
Read the guide

Keep exploring

Guides from other topics

All topics →