Short answer
There is no single number. The practical limit depends on how your layout is controlled and wired, how much power is available, and how much space you have. On a simple DC layout, you can usually run one train at a time unless the track is split into separately powered sections. With DCC, several locomotives can run independently on the same track, and the limit is more often power supply, layout size and your ability to keep track of them all.
DC: running trains in blocks
With traditional DC control, the voltage on the track sets the speed and direction of every locomotive on that section. To run two trains, you divide the track into electrically separate sections called blocks, each controlled separately. Then each train can have its own controller, as long as they stay in their own blocks.
This works, but it needs more wiring and switches, and you have to plan so that trains do not enter each other’s blocks. A small layout can handle two trains this way, and it becomes more complicated as the number grows.
DCC: independent control
With DCC, a digital signal on the track carries commands to individual locomotives, which each have a decoder with its own address. This lets you run several locomotives on one stretch of track at different speeds and directions, using one controller.
DCC does not remove all limits, but it means the main limits are:
- Power. The command station or booster has a maximum current rating. Each locomotive draws some current when running, and sound-equipped or lit models draw more. Check the figures from your equipment’s manuals and keep a comfortable margin.
- Wiring. Thin or long wiring and poor connections cause voltage drops and unreliable running. Larger layouts commonly use a heavier bus wire with feeders to the track.
- Short circuits. A derailment can short the track, and in a DCC system that can stop everything. Dividing a big layout into power districts can limit the effect.
Layout size and signalling
Even if the electronics allow it, the layout has to be able to hold the trains. If trains are close together on a small oval, they will catch up with one another. A good rule of thumb is that each train needs enough track so there is space to stop clear of the next one. On a small layout like a 4x8, two trains on separate tracks is often plenty.
Many modellers add signals, or at least agree on simple rules for operating, so trains do not collide.
Practical tips
- Decide how many trains you want to run before you decide on control
- If you are likely to expand, DCC is often easier to grow with, though it costs more at the start
- Run each locomotive on its own at first, then test together
- Keep track and wheels clean for reliable electrical contact
- Do not exceed the current rating of your power supply; check what your equipment can supply
Groups that run shared layouts, as described in modular HO layouts and Free-mo, commonly use DCC for this reason.