HO Layouts

HOn3 Narrow Gauge and Logging Track Plans

An introduction to HOn3 narrow gauge model railroading and logging track plans: what HOn3 is, equipment, logging features and layout ideas.

On this page
  1. What HOn3 is
  2. Why choose narrow gauge
  3. Equipment and track
  4. Logging railroad features
  5. Track plan ideas
  6. Practical tips
  7. Related guides

What HOn3 is

HOn3 models narrow gauge railroads in HO scale. The “HO” is the scale (about 1:87), the “n” stands for narrow gauge, and the “3” refers to the 3-foot gauge of the prototype lines it commonly represents. The model track gauge is 10.5 mm, narrower than the 16.5 mm of standard HO.

Because the scale is the same as HO, buildings, vehicles, figures and scenery from regular HO can be used. Locomotives, rolling stock and track are different.

A related option is HOn30, which models narrower prototypes using track a bit narrower still. Make sure you know which of the two you are buying, since the equipment is not interchangeable.

Why choose narrow gauge

  • Narrow gauge railroads often used tight curves, steep grades and small equipment, so they can look right on small layouts
  • The small locomotives and short trains suit compact spaces
  • Scenery is a central part of the appeal, with trestles, mountains and forests
  • It is a niche, so there is a friendly community of modellers

Equipment and track

The selection is smaller than for standard gauge HO. Some ready-to-run locomotives and cars are produced in HOn3, often in limited runs, and many modellers use kits, 3D-printed parts or older brass models. Availability varies, so check what exists for the prototype you like before committing.

Track is available in both ready-made and flex forms for HOn3, though the range of turnouts is smaller. Some modellers hand-lay their own track.

Because tiny locomotives run on narrow track, electrical pickup and clean track matter more. Fitting DCC and sound can also be harder in a small locomotive, so check what the model is designed to take.

Logging railroad features

Logging railroads are popular HOn3 themes because they make for lively, compact layouts. Typical features include:

  • Geared steam locomotives, such as Shays, Climaxes and Heislers, which were designed for rough track and steep grades. Check the models available in HOn3 before planning around one.
  • Log loading points, where logs are loaded onto flat cars or log cars
  • A sawmill, as the destination for logs
  • Logging camps and temporary spurs
  • Switchbacks, which let a line climb a hillside in a short distance by zigzagging
  • Trestles and rough bridges

Track plan ideas

  • Point-to-point line. One end at the mill and the other at the woods. It is simple and works on a shelf.
  • Switchback line. Uses a zigzag to gain height in a small space.
  • Loop with a logging spur. Gives continuous running and some switching work.
  • Branch from a larger line. A mill that connects to a standard gauge or narrow gauge main line with a transfer point.

Many logging plans work well as small point-to-point layouts. Our overview of HO layouts shows how these shapes compare.

Practical tips

  • Pick one prototype or region to model, so equipment and scenery fit together
  • Keep curves as broad as you can; tight curves make narrow gauge equipment more fussy
  • Test locomotives on a length of track before building the layout
  • Plan for track cleaning, since small locomotives are sensitive to dirt

The complete guide to ho layouts

HO Scale Model Railroading: Track Plans and Layout Designs
Read the guide

Keep exploring

Guides from other topics

All topics →