HO Layouts

Modular HO Layouts and Free-mo Standards

How modular HO train layouts work, what the Free-mo standard is, how modules connect, and what to know before you build your first module.

On this page
  1. What a modular layout is
  2. Why build modules
  3. What Free-mo is
  4. How modules join
  5. Getting started
  6. Related guides

What a modular layout is

A modular layout is built from separate sections, called modules, that can be joined together. Each module is built to a common standard so that the track lines up at the ends. The modules can be built by different people, brought to a meeting or show, joined into one large layout, then taken apart again.

Why build modules

  • Portability. A module is small enough to move, so you can run trains somewhere other than home.
  • Shared space. Several people can combine modules into a layout much larger than one person could build or house.
  • Manageable projects. Building one module is a smaller job than a whole layout, which suits people with limited room.
  • Social. Modular groups often meet to set up, run trains and swap ideas.

The trade-off is that you must follow the group’s standard, and modules must be sturdy enough to survive being transported.

What Free-mo is

Free-mo is a modular standard for HO scale that places few restrictions on the shape and scenery of a module, as long as the module ends meet the standard. The idea is “freeform” modelling: instead of a fixed set of module sizes, builders have latitude to model a prototype location or an original scene. Free-mo layouts are commonly operated with DCC and are often run with a focus on prototype-style operation, though groups differ in how they run things.

Some other modular standards exist for HO and for other scales. They vary in module sizes, track spacing and electrical arrangements. Because the details of Free-mo and similar standards are revised from time to time, check the current published standard from the group before you start building, rather than relying on numbers from an article.

How modules join

In general, modular standards specify:

  • The position and profile of the track at each module end, so rails meet
  • The height of the module top, so modules sit level
  • How the electrical bus or power connects across the joint
  • The approach to legs, framing and alignment hardware

Getting these details right matters more than anything else, because a small error at the end of a module can cause derailments across the whole layout.

Getting started

  1. Find a local group or online community that uses the standard you like, and ask to visit a setup.
  2. Obtain the current written standard.
  3. Build a simple first module. A short straight module with a single scene is a good start.
  4. Test it against another module before adding scenery.
  5. Plan transport: protective cases, handles and legs that detach.

If you are new to the hobby, you might begin with a starter layout and move to modules once you know what you like.

The complete guide to ho layouts

HO Scale Model Railroading: Track Plans and Layout Designs
Read the guide

Keep exploring

Guides from other topics

All topics →