Short answer
Generally, no. Most modellers advise against using WD-40 as a lubricant on locomotives, and many would also steer clear of it on track. It is better thought of as a penetrating, cleaning product than as a long-lasting lubricant. Opinions among hobbyists do differ, though, and a few use it in limited ways.
Why modellers hesitate
- It is not a long-term lubricant. Forum members commonly describe WD-40 as having a cleaning side but not being a true lubricant for a locomotive motor and gears. It can thin out and run off, leaving parts less protected than they would be with a purpose-made oil or grease.
- Residue can cause problems. Oily film on the rail head or wheel treads can make locomotives slip. One experienced modeller in a French-language forum said that putting it on locomotive tires makes engines spin their wheels. Another member, who used it on Z scale track, said the locomotive slipped at first but then ran well.
- It can attract dust. Any oily film on rails can collect dirt, which may eventually make cleaning harder.
- Plastics, rubber and paint may react. Model trains contain many plastics and rubber traction tires, and not every solvent is safe for all of them. We cannot say how a particular product will affect your model, so test on a hidden spot or avoid it.
- Motors. One forum member warned that WD-40 can dissolve the carbon brushes in some motors. We cannot verify this, but it is a reason to keep it away from motor internals.
What some modellers use it for
Some forum members use it in specific ways:
- Cleaning rails and pickup shoes, applied to a cloth rather than sprayed directly, then wiped off. One poster suggested spraying a cloth for rails and spraying turnouts and wiping carefully.
- Freeing gummed gears (see locomotive repair). One member said it can help loosen old, hardened oil in the gear train, followed by a proper model train oil.
- Slowing oxidation on some track types, according to a modeller using a particular brand of metal track.
These are individual practices rather than manufacturer recommendations. If you try any of them, use a very small amount and wipe away the excess.
Better choices for lubricating
Use products designed for model trains:
- Light model-train oil for bearings, axles and small moving parts.
- Plastic-safe grease for gears.
- A very small amount. Over-lubricating attracts dirt and can spread to the rails.
Check the manufacturer’s instructions for your locomotive. Some modern locomotives, especially those with sealed gearboxes, need only occasional lubrication, if any.
Better choices for cleaning track
- Isopropyl alcohol on a lint-free cloth, which is widely used to clean the rail head. Take care with painted surfaces, because some alcohols can affect certain paints, and as one forum member pointed out, certain older painted wheels.
- Track-cleaning blocks or pads for light oxidation.
- Dedicated rail cleaning fluids from model railroad brands.
Keeping the track clean is easier when it is laid smoothly and well soldered, which is covered in laying model railroad track.
If you do use it
- Never spray it directly on the layout, locomotives, plastics or scenery.
- Apply a small amount to a cloth.
- Wipe the rails dry, and keep it away from wheels and traction tires.
- Use it in a ventilated area and follow the safety information on the can.
- Stop if you see any damage, slipping or softening of plastics.