O Gauge and Lionel

Lionel FasTrack Layout Plans for a 4x8 Table

What really fits on a 4x8 table with Lionel FasTrack: width maths, oval and siding plans, figure 8 caveats, and when a 5x9 table is the better choice.

On this page
  1. What fits on a 4x8
  2. The width maths
  3. Plan 1: oval with a passing siding
  4. Plan 2: oval with a yard spur
  5. Plan 3: figure 8 or over-and-under
  6. When a 5x9 is the better choice
  7. Table construction and power
  8. Buying kits vs planning your own

What fits on a 4x8

A 4x8-foot sheet of plywood is the classic starting size in the hobby, but it is tight for O gauge. A 4x8 can hold a basic oval with a siding or two. It generally cannot hold the complex plans that fit on a 4x8 in tighter-curve track systems. One retailer’s plans show that several layouts that fit a 4x8 in some track systems need roughly 5x9 feet with FasTrack. Pre-packaged FasTrack layouts for 4x8 tables are sold by retailers, typically with a continuous loop, a siding and manual switches, so plans that really are designed for 4x8 do exist.

The width maths

The Lionel Collectors Club gives a rule for FasTrack: the table width of a full circle is the curve number plus 3⅜ inches. That makes an O36 circle 39⅜ inches wide, which fits within a 4-foot (48-inch) table with about four inches to spare on each side. An O48 circle is 51⅜ inches wide, so it doesn’t fit across 48 inches. Parallel loops are normally spaced 6 inches center to center, so an O36 loop with an O48 loop outside it needs at least 51⅜ inches, more than a 4x8 offers.

In practice, a 4x8 table with FasTrack usually means O36 curves, and one loop rather than two concentric ones. Check these numbers against your own track plan or software before cutting wood.

Plan 1: oval with a passing siding

The simplest useful plan is an oval of O36 curves joined by straight sections, with a pair of switches creating a passing siding on one side. With the siding you can park one train while another runs, or store extra cars. Ovals of this type fit on a 4x8 with some margin. A longer straight section stretches the oval toward the eight-foot length.

Plan 2: oval with a yard spur

Add one or two spurs off the main loop for switching cars. A short spur can serve as an industry, while another could hold spare locomotives. Make sure locomotives with front couplers can push cars into spurs. Leave room for a lighted building or a few accessories, and keep the track far enough from the table edges that a derailed car doesn’t fall off.

Plan 3: figure 8 or over-and-under

Figure 8 layouts and “twice around” layouts using a trestle set are popular because they lengthen the run. They are also the plans most likely to crowd a 4x8 when built with FasTrack. If you want one, check the plan’s dimensions for FasTrack specifically; some published plans for other track systems would need about 5x9 in FasTrack. On over-and-under layouts, much of the grade can fall on curves, which increases the chance of derailments, so keep grades gentle and make sure there is enough clearance for your tallest car.

When a 5x9 is the better choice

A 5x9 table opens up double loops, reverse loops and a more interesting arrangement with wider curves, and it fits the published FasTrack versions of several 4x8 plans. If you are still building the table, an extra foot in each direction makes a big difference. See how much space an O gauge layout needs for more sizes.

Table construction and power

A sheet of plywood works, but a hollow tabletop can amplify noise, so many builders add cork or another sub-roadbed under the track, or build a frame with an open grid. Plan to feed power at more than one point on a bigger loop. Our guide to wiring an O scale layout explains this.

Buying kits vs planning your own

Kits give you a known-good parts list. If you plan your own, use track-planning software or draw to scale on paper, count straights, curves and switches, and check left-hand and right-hand switch directions. Track-planning software is available from other manufacturers, but Lionel didn’t offer design software for FasTrack at the time one retailer wrote its guide, so plans for other systems may need adjusting for FasTrack. For more compact ideas, read small Lionel train layouts, and for the big picture see O gauge and Lionel layout plans.

The complete guide to o gauge and lionel

O Gauge and Lionel Train Layout Plans
Read the guide

Keep exploring

Guides from other topics

All topics →