The short answer
A platform in a train station is a raised, flat surface alongside the tracks where passengers wait for trains and get on and off. It is usually built at a height that makes it easier to step between the platform and the train’s doors. On a model railroad, a platform is a small raised strip beside the track, often part of a station building, that gives passenger trains a place to stop.
Platform vs station
People often use the two words interchangeably, but they are different. The station is the whole facility: the building, ticket counters, waiting rooms and entrances. The platform is just the strip beside the track where boarding takes place. A small stop might have a platform and no building at all, while a large terminal has many platforms.
Common platform types
- Side platform: sits beside a track on its outer edge. It is the most common arrangement, and on a two-track line there is often one on each side, one for each direction.
- Island platform: a single platform with a track on each side, so passengers can use either track from the same platform.
- Bay platform: a dead-end or stub track, usually at the end of a station or at a terminal, where the train arrives and then reverses out.
- Staggered or split platforms: platforms placed at different positions or levels along the line to save space or fit awkward sites.
Platform height and why it matters
Real platform heights vary by country, railroad and type of train, and some are level with the car floor while others are low and use steps. For modelers, the lesson is to look at the equipment you plan to use. In O scale (1:48 in the U.S.), one real foot is a quarter of an inch, so a platform four feet above the rail would stand about an inch high. Low platforms are only a fraction of an inch. Choose a height that looks right with your passenger cars, and don’t let it foul the cars’ bodies.
Platforms on an O scale layout
Station platforms are commonly sold as accessories for O gauge layouts, often lighted and styled to match the buildings. You can also build one from wood, foam board or styrene. Many O gauge builders place a platform next to a siding or passing track so that a passenger train can stop while other trains pass on the main line. If you want a station on a loop layout, the platform can simply sit beside the main line. For layouts with a terminal, a bay platform with a short stub track works well. For more layout planning, see O gauge and Lionel layout plans.
Placement and clearance tips
- Test with your longest car. Overhang on curves swings the car body outward, so a platform placed near a curve needs more clearance than one on straight track.
- Keep platforms on straight track where possible, so cars line up well and are not hit by overhang.
- Leave room for the platform’s length. A platform should be long enough for the train that will stop at it. On a small layout, a short train may be best. See how much space an O gauge layout needs.
- Check the track level. Make sure the track beside the platform is level and securely fastened so that trains don’t derail where passengers would be standing.
- Plan wiring. If the platform has lights, plan the power. See wiring an O scale layout.